Navigation
- Introduction
- Make sure your power source works
- Check the power cable
- Check the power adapter
- Cool down the power adapter
- Clean the charging port
- Check the battery
- Adjust the trucks
- Restart the skateboard
- Some other possible reasons for a not working skateboard
- Incorrect charging or usage
- Take it to the repair shop
- Preventive measures
- Conclusion
Introduction
Electric skateboarding has never failed to fascinate young generations and has gradually become a brand-new way of life: people skateboard to work and school. However, just like any other gadget, electric skateboards may run into unexpected problems.
Recently, many users have reported that they have problems with their skateboard batteries. When they check the battery indicator, they notice that their battery is not charging. If you also run into this issue, don't worry! We've put together some useful fixes to diagnose and resolve the issue.
Make sure your power source works
Sometimes the problem may not be with the skateboard but with the power source. Make sure that your power outlet is functional and connected to the power supply. Alternatively, try a different power source or change the outlet. You could also try using a different charging cable to rule out the probability that the cable is the issue. If the skateboard is still not charging, the problem could be with the battery.
Check the power cable
The power cable may also be the issue if the skateboard is not charging. Make sure that all the wires are connected and secure. Check any frayed or damaged wires that may be causing a short circuit. If the wires are damaged, replace them.
Check the power adapter
The power adapter may be the issue if your skateboard is not charging. The adapter may be broken, faulty, or may not be properly connected to the skateboard. Check the charging indicator to ensure that it is working properly. Also, pay attention to any unusual sounds or smells coming from the adapter. If the adapter is not functioning correctly, consider a replacement.
Cool down the power adapter
Overheating could adversely affect charging. When your electric skateboard won't charge, the first thing you should do is check the power adapter. If the power adapter is too hot, it's probably the cause of the problem.
Unplug your skateboard until your power adapter cools down. Place the power adapter in a location where it can get plenty of airflow. Stay ventilated. Avoid placing it in small, confined spaces or covering it with any materials.
Clean the charging port
The charging port may be clogged with dirt and debris, making the connection between the charger and the skateboard weak. Dirt and debris can prevent the flow of electricity and inhibit charging. Use a toothbrush, compressed air, or a clean, dry cloth to clean the charging port. Please avoid using any liquid as it could cause corrosion, damaging both the skateboard and the charger.
Check the battery
If the power source is not the issue, you should check if the battery is in good condition and has no physical damage. Then, make sure that the battery is connected correctly and securely. If the battery is removable, remove it from the skateboard and check if it is swollen, leaking or has any signs of damage. If the battery is in poor condition, contact your local shop and replace it with a new one.
Adjust the trucks
The trucks of an electric skateboard connect the deck and the wheels in the most stable way. However, if they're loose, higher speeds can make them swing. This leads to speed wobble.
Adjusting trucks is quite easy. A kingpin bolt should be tightened by turning a wrench clockwise. It's a large bolt located in the middle of the trucks.
The solution is to make the rear truck tighter or as tight as the one in the front.
Restart the skateboard
Restarting your skateboard may help in situations where the issue is software-based. Some electric skateboards have a reset button that you can press to reset the system. If your skateboard does not have a reset button, disconnect the battery and leave it for a few minutes before reconnecting it.
Some other possible reasons for a not working skateboard
Sometimes, the problems are not only with the battery but also with other important components of your skateboard.
Here are a few exceptions you should consider.
Water Damage
Water is the worst enemy of an electric skateboard. Exposing the board to water or moisture can cause the electrical components to malfunction or even become damaged, leading to problems such as reduced speed or complete loss of power. If you carelessly spilled some water on your e-board, wipe the device down with a clean, dry cloth to remove any moisture. You can also use a low-powered hair dryer or a dry cotton swab to remove moisture from tight areas. Do not use a high-powered hair dryer, as this can further damage the device.
Remote Pairing Issues
Make sure that both the remote and the electric skateboard have enough battery power. If either the remote or skateboard is low on battery, it may cause pairing issues. Follow the instructions in the user manual for pairing the remote with the skateboard. Make sure that there are no electronic devices or wireless signals that could interfere with the pairing process. This can include other Bluetooth devices, Wi-Fi signals, or microwaves.
Malfunctioning motor
The motor is a critical component of the electric skateboard, and if it's not working correctly, the skateboard will not function properly.
- Check the motor for any damage, loose connections, or debris.
- Clean the motor with a dry cloth or compressed air to ensure it is free from debris.
- If the gears in the motor are damaged, it can cause malfunction.
- Check whether the gears are in good condition and replace them if necessary.
Incorrect charging or usage
If the skateboard is not charged or used improperly, it can cause the skateboard to not work correctly. Check the manufacturer's instructions for charging and usage guidelines to ensure you're using the skateboard correctly.
Take it to the repair shop
If you have diagnosed the problem and tried all the above methods, and your skateboard is still not charging, consider a professional repair center. They have the necessary tools, experience, and knowledge to diagnose and fix complex issues with electric skateboards. If you need excellent customer service, please turn to Jking electric skateboard for help. They are professional electric skateboard brand that prides themselves on customer satisfaction.
Preventive measures
Charging problems can be frustrating and can even cause damage to the skateboard or the charging equipment if not addressed properly. To prevent such issues, there are several preventive measures that electric skateboard users should take when charging their devices.
- Always follow the charging instructions or user manual provided with your electric skateboard to extend battery life as long as possible.
- Try to use your battery periodically. The lifetime of the battery will decrease if the battery is not used frequently. Try to recharge your board every six months.
- Kick push to start and then slowly engage the motors, rather than accelerating from a full stop using only the motors.
- When braking from high speeds, brake smoothly until you reach the speed of fast walking and then brake to a stop.
- Keep children away from the electric skateboard during charging.
- Do not leave the device charging unattended, especially overnight. Because of a faulty cut-off, switch, or plug without a fuse could lead to it overheating, exploding, or catching fire.
- Do not use modified electrical controls or wires for charging and do not open the battery pack.
- Regularly examine the charger to see whether there is any damage to the cord, plug, enclosure, and other parts. If there is any damage, repair or replace them before you charge.
Conclusion
In conclusion, an electric skateboard that does not charge can be annoying, especially when you need it the most. It is, therefore, essential that you know how to troubleshoot charging problems. It is also important to take safety measures seriously and avoid tampering with the skateboard or its components if you are not sure what you are doing. Always refer to the user manual for guidance or seek professional help when needed.
Hinterlasse einen Kommentar
Alle Kommentare werden vor der Veröffentlichung geprüft.
Diese Website ist durch hCaptcha geschützt und es gelten die allgemeinen Geschäftsbedingungen und Datenschutzbestimmungen von hCaptcha.